Stainless steel strip

The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance.
Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue.
Product Specification and Steel Grade
ASTM | JIS | AISI | EN | Mill’s Standard | |
Grade | S30100 S30400 S30403 S31008 S31603 S32100 S41008 S43000 S43932 S44400 S44500 | SUS301 SUS304 – SUS310S – SUS321 SUS410S SUS430 – SUS444 SUS430J1L | 301 304 304L 310S 316L 321 410S 430 – 444 – | 1.4310 1.4301 1.4307 1.4845 1.4404 1.4541 – 1.4016 1.4510 1.4521 – | 201 202 204Cu3 |
Hot Rolled Strip Available Size
Width: 16.0~609.6 mm
Thickness: 2.5~10.0 mm
Available Steel Grade: 304, 304L, 316L
Surface Finish: No.1
Cold Rolled Strip Available Size
Width: 4.0~609.6 mm
Thickness: 0.1~3.0 mm
Available Steel Grade: 201, 202, 204 Cu3, 301, 304, 304L, 310S, 316L, 321, 409L, 410S, 420J2, 430, 439, 441, 444, 445
Surface Finish: 2B, 2D, BA, No.3, No.4, No.5, SB, HL
Application
Stainless steel strip is widely used in compressor valves, knives, scissors and spring applications. 304 stainless steel strip is used in variety of products including forks and knives.
Tolerance of Width
W < 100 mm | 100 mm ≦ W < 1000 mm |
± 0.10 mm | ± 0.25 mm |
Chemical Composition & Mechanical Property :
Chemical Composition (For Reference)
JIS SpecificationSpec. | ||||||||||
Steel Grade | C% Max. | Si% Max. | Mn% Max. | P% Max. | S% Max. | Cr% Max. | Ni% Max. | Mo% Max. | Ti% Max. | Other |
SUS301 | 0.15 | 1 | 2 | 0.045 | 0.03 | 16.0~18.0 | 6.0~8.0 | – | – | – |
SUS304 | 0.08 | 1 | 2 | 0.045 | 0.03 | 18.0~20.0 | 8.0~10.5 | – | – | – |
SUS304L | 0.03 | 1 | 2 | 0.045 | 0.03 | 18.0~20.0 | 9.0~13.0 | – | – | – |
SUS310S | 0.08 | 1.5 | 2 | 0.045 | 0.03 | 24.0~26.0 | 19.0~22.0 | – | – | – |
SUS316L | 0.03 | 1 | 2 | 0.045 | 0.03 | 16.0~18.0 | 12.0~15.0 | 2.0~3.0 | – | – |
SUS321 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.0~19.0 | 9.0~13.0 | – | 5xC MIN. | – |
SUH409L | 0.03 | 1 | 1 | 0.04 | 0.03 | 10.5~11.75 | 0.6 | – | 6xC~0.75 | – |
SUS410S | 0.08 | 1 | 1 | 0.04 | 0.03 | 11.5~13.5 | 0.6 | – | – | – |
SUS420J2 | 0.08 | 1 | 1 | 0.04 | 0.03 | 12.0~14.0 | 0.6 | – | – | – |
SUS430 | 0.12 | 0.75 | 1 | 0.04 | 0.03 | 16.0~18.0 | 0.6 | – | – | – |
ASTM SpecificationSpec. | ||||||||||
Steel Grade | C% Max. | Si% Max. | Mn% Max. | P% Max. | S% Max. | Cr% Max. | Ni% Max. | Mo% Max. | Ti% Max. | Other |
S30100 | 0.15 | 1 | 2 | 0.045 | 0.03 | 16.0~18.0 | 6.0~8.0 | – | – | N: 0.1Max. |
S30400 | 0.07 | 0.75 | 2 | 0.045 | 0.03 | 17.5~19.5 | 8.0~10.5 | – | – | N: 0.1Max. |
S30403 | 0.03 | 0.75 | 2 | 0.045 | 0.03 | 17.5~19.5 | 8.0~12.0 | – | – | N: 0.1Max. |
S31008 | 0.08 | 1.5 | 2 | 0.045 | 0.03 | 24.0~26.0 | 19.0~22.0 | – | – | – |
S31603 | 0.03 | 0.75 | 2 | 0.045 | 0.03 | 16.0~18.0 | 10.0~14.0 | 2.0~3.0 | – | N: 0.1Max. |
S32100 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 17.0~19.0 | 9.0~12.0 | – | 5(C+N)~0.70 | N: 0.1Max. |
S41000 | 0.08~0.15 | 1 | 1 | 0.04 | 0.03 | 11.5~13.5 | 0.75 | – | – | – |
S43000 | 0.12 | 1 | 1 | 0.04 | 0.03 | 16.0~18.0 | 0.75 | – | – | – |
S43932 | 0.03 | 1 | 1 | 0.04 | 0.03 | 17.0~19.0 | 0.5 | – | – | N:0.03Max. Al:0.15Max. Nb+Ti = [ 0.20 + 4 ( C + N ) ] ~ 0.75 |
Mechanical Property (For Reference)
JIS SpecificationSpec. | ||||||
Steel Grade | N/mm 2 MIN. Tensile Stress | N/mm 2 MIN. Proof Stress | % MIN. Elongation | HRB MAX. Hardness | Bendability: Bending Angle | Bendability: Inside Radius |
SUS301 | 520 | 205 | 40 | 95 | No Require | – |
SUS304 | 520 | 205 | 40 | 90 | No Require | – |
SUS304L | 480 | 175 | 40 | 90 | No Require | – |
SUS310S | 520 | 205 | 40 | 90 | No Require | – |
SUS316L | 480 | 175 | 40 | 90 | No Require | – |
SUS321 | 520 | 205 | 40 | 90 | No Require | – |
SUH409L | 360 | 175 | 25 | 80 | 180° | 0.5t (t<8mm) 1.0t (t>8mm) |
SUS410S | 410 | 205 | 20 | 88 | 180° | 1.0 time the thickness |
SUS420J2 | 540 | 225 | 18 | 99 | No Require | – |
SUS430 | 420 | 205 | 22 | 88 | 180° | 1.0 time the thickness |
ASTM SpecificationSpec. | |||||||
Steel Grade | N/mm 2 MIN. Tensile Stress | N/mm 2 MIN. Proof Stress | % MIN. Elongation MIN. | HRB MAX. Hardness | HBW MAX. Hardness | Bendability: Bending Angle | Bendability: Inside Radius |
S30100 | 515 | 205 | 40 | 95 | 217 | No Require | – |
S30400 | 515 | 205 | 40 | 92 | 201 | No Require | – |
S30403 | 485 | 170 | 40 | 92 | 201 | No Require | – |
S31008 | 515 | 205 | 40 | 95 | 217 | No Require | – |
S31603 | 485 | 170 | 40 | 95 | 217 | No Require | – |
S32100 | 515 | 205 | 40 | 95 | 217 | No Require | – |
S41000 | 450 | 205 | 20 | 96 | 217 | 180° | – |
S43000 | 450 | 205 | 22 | 89 | 183 | 180° | – |
S43932 | 415 | 205 | 22 | 89 | 183 | 180° | – |