Aluminium Square Bar

The advantages of aluminium alloy are lightweight, excellent electrical and thermal conductivity, high corrosion resistance and ductility.

Aluminium alloy is soft and usually alloyed with copper, zinc, magnesium, silicon, manganese and lithium to increase strength. When aluminium alloy is exposed to air, an anti-oxidant coating will be formed instantly to protect products. Aluminium alloy is one of the lightest metals. The application of products ranges from precision technology to daily commodities.

Product Specification and Size :

Standard Specification: GB/T 3191, ASTM B221, EN754, EN 755

AlloyTemper
2xxx: 2014, 2024T4, T6, T3511, T4511
5xxx: 5083O, H112
6xxx: 6005, 6060, 6061, 6063, 6082,, 6463T4, T5, T6, T66, T6511

Alloy Designation (For Reference)

Comparison of Alloy Designations for Aluminium flat Products

Temper Designation (For Reference)

TemperDefinition
OAnnealed
H112Slightly strain harden from working at an elevated temperature or from limited amount of cold work
T3Solution heat-treated and naturally aged
T5Cooled from an elevated temperature shaping process and then artificially aged
T6Solution heat-treated and then artificially aged
T66Solution heat-treated and then artificially aged – mechanical property level higher than T6 achieved through special control of the process (6000 series alloys)
T3511Solution heat-treated and stress-relieved by stretching to produce a normal permanent set of 1-1.5%, but not less than 1% nor more than 3%
T6511Solution heat-treated, stress-relieved by stretching and artificially aged with minor straightening.

Available Size Range

DimensionRange
Width10mmx10mm~250mmx250mm
Length1,000mm~6,000mm

Application

Aluminium alloy flat bar or aluminum alloy square bar can be widely applied in construction, machinery, electronics, sports equipment, advertising, transportation, consumer goods, furniture, aviation, military, and other application.

– Production Process: Extruded, Cold Drawn
– Form: Square
– Surface Finish: Mill Finish, unless otherwise specified
– Surface Protection: Paper interleaved for bar

Chemical Composition (For Reference)

Chemical Composition conforms to Chinese, American and European standard specification

Chemical Composition conforms to Chinese, American and European standard specification

AlloySiFeCuMnMgCrZnTiOthers:
Each
Others:
Total
Al: Min.
20240.500.503.80~4.900.30~0.901.20~1.800.100.250.150.050.15remainder
57540.400.400.100.502.60~3.600.300.200.150.050.15remainder
50830.400.400.100.40~1.04.00~4.900.05~0.250.250.150.050.15remainder
60600.30~0.600.10~0.300.100.100.35~0.600.050.150.100.050.15remainder
60610.40~0.800.700.15~0.400.150.80~1.200.04~0.350.250.150.050.15remainder
60630.20~0.600.350.100.100.45~0.900.100.100.100.050.15remainder
60820.70~1.300.500.100.40~1.00.60~1.200.250.200.100.050.15remainder