Aluminium Foil

The advantage properties of aluminium alloy are light weight, excellent electrical and thermal conductivity, high corrosion resistance and ductility.
Aluminium alloy is soft and usually alloyed with copper, zinc, magnesium, silicon, manganese and lithium to increase strength. When aluminium alloy is exposed to air, an anti-oxidant coating will be formed instantly to protect products. Aluminium alloy is one of the lightest metals. The application of products ranges from precision technology to daily commodities.
Product Specification and Size :
Standard Specification: GB/T 3198, EN 546
Alloy | Temper |
1xxx: 1050, 1051A, 1060, 1100, 1145, 1235, 1200 | O, H14, H16, H18, H19, H22, H24, H26 |
3xxx: 3003 | |
8xxx: 8011, 8011A, 8079 | O, H18, H19, H22, H24, H26 |
Alloy Designation (For Reference)
Comparison of Alloy Designations for Aluminum Products
Chinese Standard | American Standard | European Standard |
1050 | – | – |
1050A | – | EN AW-1050A |
1060 | 1060 | – |
1100 | 1100 | – |
1145 | 1145 | – |
1200 | – | EN AW-1200 |
1235 | 1235 | EN AW-1235 |
3003 | 3003 | EN AW-3003 |
8011 | – | – |
8011A | – | EN AW-8011A |
8079 | – | EN AW-8079 |
Temper Designation (For Reference)
Temper | Definition |
O | Annealed |
H14 H16 H18 H19 | Strain Hardened, 1/2 Hard Strain Hardened, 3/4 Hard Strain Hardened, Full Hard Strain Hardened, Extra Hard |
H22 H24 H26 | Strain Hardened and Partially Annealed, 1/4 Hard Strain Hardened and Partially Annealed, 1/2 Hard Strain Hardened and Partially Annealed, 3/4 Hard Strain Hardened and Partially Annealed, Full Hard |
H28 | Strain Hardened and Partially Annealed, Full Hard |
Available Size Range
Dimension | Range |
Thickness | 0.006 ~ 0.2 mm |
Width | 200 ~ 1,800 mm |
– Surface Condition:
One side bright, the other side matter (for double rolled)
Two sides bright (for single rolled)
– Surface Treatment: Lubrication, Lamination, Coating
– Core Type and Size :
Type: Aluminium, Sheel, Fiber
Core ID: 75mm, 76.2mm, 150mm, 152.4mm, 300mm, 400mm
Application
Aluminium and aluminium alloy foil can be widely applied in containers, packaging, household & institutional foil, food service products, foil building products, aluminium foil capacitors, aluminium foil finstock, aluminium foil strip conductor, aluminium honeycomb, aluminium foil printing plates, nameplates & product labels, caul stock, foil printing stocks, etc.
Type | Application |
Food Packaging | Beverage can end, can tap, cap stock, etc. |
Construction | Curtain walls, cladding, ceiling, heat insulation and venetian blind block, etc. |
Transportation | Automobile parts, bus bodies, aviation and shipbuilding and air cargo containers, etc. |
Electronic Appliance | Electrical appliances, telecommunication equipment, PC board drilling guide sheets, lighting and heat radiating materials, etc. |
Consumer Goods | Parasols and umbrellas, cooking utensils, sports equipment, etc. |
Other | Military, color coated aluminum sheet |
Chemical Composition (For Reference)
Chemical Composition conforms to Chinese, American and European standard specification.
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others: Each | Others: Total | Al: Min. |
1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | – | 0.05 | 0.03 | 0.03 | – | 99.5 |
1050A | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | – | 0.05 | 0.03 | 0.03 | – | 99.5 |
1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | – | 0.05 | 0.03 | 0.03 | – | 99.6 |
1100 | 0.95 Si + Fe | 0.95 Si + Fe | 0.05~0.20 | 0.05 | – | – | 0.1 | – | 0.05 | 0.15 | 99 |
1200 | 1.00 Si + Fe | 1.00 Si + Fe | 0.05 | 0.05 | – | – | 0.1 | 0.05 | 0.05 | 0.15 | 99 |
1145 | 0.55 Si + Fe | 0.55 Si + Fe | 0.05 | 0.05 | 0.05 | – | 0.05 | 0.03 | 0.03 | – | 99.45 |
1235 | 0.65 Si + Fe | 0.65 Si + Fe | 0.05 | 0.05 | 0.05 | – | 0.1 | 0.06 | 0.03 | – | 99.35 |
3003 | 0.6 | 0.7 | 0.05~0.20 | 1.0~1.5 | – | – | 0.1 | – | 0.05 | 0.15 | remainder |
8011 | 0.5~0.9 | 0.6~1.0 | 0.1 | 0.2 | 0.05 | 0.05 | 0.1 | 0.08 | 0.05 | 0.15 | remainder |
8011A | 0.4~0.8 | 0.5~1.0 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.05 | 0.05 | 0.15 | remainder |
8079 | 0.05~0.3 | 0.7~1.3 | 0.05 | – | – | – | 0.1 | – | 0.05 | 0.15 | remainder |